For your 2019 Forest River Cherokee Travel Trailer, I recommend the Solera RV Slide-Out Awning, # LCV000163300 for slide-outs between 152" to 157" and, # LCV000163299 for slide-outs 146" to 151". view full answer...
Meg, for your Lippert Solera 2000 series awning you can use the Replacement Front Cover for Lippert Edge Awnings # LC32NJ for the front and # LC43UD for the rear to replace your damaged cover.
Also, if by cap you're meaning the manual override grommet you can use # LC95ED to replace that as well. view full answer...
I recommend the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT for your 2022 Forest River Cherokee Alpha Wolf 33BH-L. This lock set includes a receiver hitch lock for 2" and 1-1/4" receiver, coupler latch lock and coupler storage lock. All locks are keyed alike to reduce the different keys you need to carry. view full answer...
You may be able to use a keyless entry door lock, depending on the exact dimensions of the cut out. The cut out for the entry door lock will need to be 3-3/4" tall x 2-3/4" wide.
If you do have those exact dimensions and the lock is on the left side of your door (so you use your right hand to open it), you can use a keyless latch from Global Link:
- Global Link Ultra E Pro Electronic Lock for Travel Trailer # 295-000183
The cut out sizes are mostly standard, but I do recommend ensuring... view full answer...
When it comes to installing a weight distribution system on your 2021 Forest River Cherokee Alpha Wolf Travel Trailer being as close to the trailer weight is the best. I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 2-5/16 inch Hitch Ball - 10K GTW # FA94-00-1061.
This system has an integrated 2-point sway control that limits side-to-side movement. It has steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers. They have a no-drill,... view full answer...
The small pitch arm is not offered separately for the Lippert Edge awning you have, so you'd have to replace the entire assembly with the Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs # LC22ED and the Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs # LC62ED. view full answer...
To replace the wheels on your 2019 Forest River Cherokee Alpha Wolf 27RK-L I recommend checking out the Aluminum Viking Series Valhalla Trailer Wheel # AX02550545BMMFL which has a 5 on 4-1/2" bolt pattern and has a black base with silver accents and a center cap to give it a completely finished look.
Attached is a review video of this wheel as well as a link to our selection of 15" wheels with a 5 on 4-1/2" bolt pattern if you're interested in other styles as well. view full answer...
The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased part # AKHD-545-35-EZ-K comes with a lithium based grease installed so as long as the grease you want to use has the same base there will be no issues with mixing. The color of the grease does not matter, just the base. We typically recommend the LubriMatic LMX Industrial Strength Grease part # L11390 using the LubriMatic Standard-Duty, Lever Action Grease Gun part # L30200.
It looks like most... view full answer...
While we do have a way to measure your leaf springs, we do not have the specs that show the exact leaf spring size on a 2020 Forest River Cherokee Alpha Wolf 26DBH-L.
With that being said, you can definitely figure out the measurements you need on your trailer. The measurements you need depend on if you have double-eye leaf springs or slipper springs on your rig.
If you have double eye springs, here is the information we need:
- number of leaves needed
- axle weight rating
- length... view full answer...
The majority of fan covers like the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40443 are designed to fit a variety of roof vents, so they may run a tad bit large and that is unavoidable.
However, if you purchased something like the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002, that may explain the extra largeness of it, as it designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs.
This roof... view full answer...
Without knowing the exact dimensions of your 2020 Forest River Alpha Wolf 26RL-L's range vent opening, we do have vents that may fit your application:
- Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar # V2111-55
- Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar # V2111-03
Both of these vents have 10-1/2" wide x 3-3/4" tall rough openings. The # V2111-55 has a collar depth of 1-3/4" while the # V2111-03 has a collar depth of... view full answer...
Yes. The Idler head cover for the Lippert Edge Awning is available with part # LC37UD. If you needed to replace the Driver head then you'd use # LC32NJ. view full answer...
The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased is offered with two different grease caps, part # AKHD-545-35-K for standard or part # AKHD-545-35-EZ-K for easy lube spindles. I suppose you could order the hub that comes with standard grease caps and just reuse your easy lube caps but I recommend the hub that comes with the easy lube grease caps since you would get newer, better components this way. view full answer...
Your 2020 Forest River Alpha Wolf 26RBL has 3,500LB axles. I recommend the Road Armor Shock Absorbing Equalizer Kit # LC696740 to replace your triangular equalizer. You can pair this with the Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles # LC52SV. If your current leaf springs have nylon bushings they will need to be swapped with Bronze Bushings # D014-077-00. Be sure to get 8 of these for all 4 of your leaf springs.
The Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks... view full answer...
It looks like the J2500 leveling jacks are scissor jacks. SnapPad does not currently manufacture snap pads for scissors jacks.
We do have the Stromberg Carlson Base Pad # SC26MR available. This will offer some protection to your scissor jacks and saves you from having to raise and lower the scissor jacks as far. Each pad is 8" tall and can handle up to 3,500 lbs. view full answer...
For your slide out measuring 154.5" outside flange to outside flange on your Alpha Wolf you will want to use the Solera RV Slide-Out Awning # LCV000163300 (white) or # LCV000168109 (black). view full answer...
I believe when you say sway bars you're actually looking for a weight distribution system with sway control. The purpose of a weight distribution system is to limit side to side movement of your trailer while you tow using the spring bars to keep your trailer centered.
With that being said, typically you'd want to pick a WDS that has your trailer total tongue weight somewhere in the middle, so I'd recommend going with the Curt TruTrack Weight Distribution System w/ Sway Control # C17499.
This... view full answer...
You'll need a table that is, at minimum, 22" wide x 18" deep to fit the Greystone Countertop Side-by-Side RV Griddle and Grill # WAY94FR. view full answer...
That's an excellent question, and the way weight distribution hitches work in regards to rating is that you need to take into account your total tongue weight, which is the tongue weight of your fully loaded trailer, plus the weight of any cargo that is behind the rear axle of your tow vehicle.
So the 100 lbs of gear in your truck bed will absolutely be a factor, and you will want to upgrade from the 750 lb Blue Ox SwayPro spring bars to the 1,000 lb rated bars, which are the following... view full answer...
I can understand not wanting to take the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 along for security reasons, though there isn't an available option for the JXS that can add a dual wheel or a trailer stand with a wheel that attaches to the Valet. The issue is not only a mount not fitting, but also that jacks with wheels don't have a similar capacity to the 5,000 lb Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211.
So really the best option I can recommend is adding... view full answer...